background image

Simco-Ion EQUIPMENT

REPAIR WARRANTY

Simco-Ion equipment has been carefully tested and inspected at the
factory and is warranted to be free from any defects in materials or
workmanship.

Simco Japan, Inc. will, under this warranty, repair or replace any
equipment, which proves upon their examination, to have become
defective within the Warranty period from the date of purchase. A one
year Warranty applies to all Simco-Ion equipment. The equipment is
to be returned by the purchaser to Simco Japan, Inc. or authorized
agent of Simco-Ion, transportation prepaid and insured for its full
purchase price. Prior to returning any goods for any reason, contact
Simco Japan, Inc. or authorized agent for an Authorized Return
Number. This number must accompany all returns.

The Warranty does not apply when the equipment has been tampered
with, misused, improperly installed, altered, has received damage
through abuse, carelessness, accident, connected to improper line
voltage, or has been serviced by anyone other than an authorized
factory representative. The warranty does not apply when Simco-Ion
parts and equipment have been energized by other than appropriate
Simco-Ion Power unit or generator, or when Simco-Ion Power unit or
generator has been used to energize other than Simco-Ion parts and
equipment.

Simco Japan, Inc. makes no Warranty, expressed or implied, nor
accepts any obligation, liabilities or responsibility in connection with
the use of this product other than the repair or replacement of parts
as stated herein.

Simco-Ion Electrostatic Neutralizer

Product

Static Neutralizing Bar MEB / SS-50

Name

A one year

Delivery

Warranty

Product's serial number contains

Warranty

Date

Period

information on the shipping date.

INST 13051312

-

SIMCO JAPAN, INC.

1-2-4, Minatojima-Nakamachi,

Chuo-ku, Kobe, 650-0046, Japan

Phone: +81-78-303-4651 Fax: +81-78-303-4655

WEB: http://www.simcoion.jp/

INQUIRY e-mail: [email protected]

Summary of Contents for Simco-Ion MEB/SS-50














Reviews: