ITW LOVESHAW LITTLE DAVID LD7D, Owner'S Manual

Page: 15 / 42

LOVESHAW an ITW Company
BOX PROBLEMS:
BOXES JAMMING IN MACHINE:
1. JAM
CLEARING PROCEDURE:
1. STOP MACHINE.
2. OPEN SIDE RAILS AND RAISE HEAD.
3. REMOVE JAMMED BOXES. CUT TAPE FLUSH WITH END OF WIPE ROLLER.
4. RESET HEAD AND SIDE RAILS TO A SAMPLE SIZE BOX.
5. START MACHINE. MACHINE IS NOW READY TO PROCESS THE NEXT BOX.
2. INCORRECT BOX SIZE OR SHAPE:
1. CHECK BOXES TO MAKE SURE THE SIZE FALLS WITHIN THE LIMITS OF THE MACHINE.
2. MACHINE WILL NOT PROCESS UNSTABLE BOXES.
3. CONTENTS BULGING THROUGH TOP OF BOX:
1. CHECK TO BE SURE BOX IS NOT OVERFILLED WITH CONTENTS.
4. BOX SLIPPING AGAINST BELTS:
1. INCREASE HEAD PRESSURE.
5. SIDE RAIL PRESSURE TOO HIGH:
1. OPEN SIDE RAILS SLIGHTLY.
6. HEAD PRESSURE TOO HIGH:
1. RAISE HEAD SLIGHTLY.
BELT DRIVE PROBLEMS:
CHECK THAT MACHINE IS CONNECTED TO A LIVE ELECTRICAL SOURCE.
1. BELTS
SLIP:
1. RAISE HEAD SLIGHTLY.
2. CHECK BELT TENSIONING SPRINGS. REPLACE IF MISSING OR BROKEN.
2. BOX SLIPS AGAINST BELTS:
1. LOWER HEAD SLIGHTLY TO INCREASE PRESSURE ON BOX.
3. BELTS RUB AGAINST FRAME:
1. CHECK THAT BELTS ARE POSITIONED CORRECTLY IN BETWEEN THE BELT GUIDE
ROLLERS.
2. CHECK FOR MISSING OR BROKEN BELT TENSIONING SPRINGS.