Integrated Technical Vision Ltd.
38
b.
The system will warn operator after the receiving of the data
package from the new panel. Than operator must add panel to the
system database (DB).
c.
After the panel added to the DB it receives the answer from the
access control system server. The address of the access control
system server recorded into the control panel and it stops to
broadcast.
d.
Operator has to upload panel after it’s adjustment recorded into
the DB. Panel will be connected to the certain access control
system server, eliminating panel control capture with another
system.
e.
In the case of access control system IP address change panel will
initiate the automatic configuration routine, but the data exchange
will be possible with previously connected system only.
U-Prox IC L addresses automatic configuration for repeaters
1.
Repeater checks for DHCP mode ON (panel address 0.0.0.0) or static IP
2.
If DHCP mode is ON, the dynamic IP address obtain routine will start
3.
The panel automatic configuration mode starts if the U-Prox IC L panel IP
address (IP or DNS name) is not set:
a.
Repeater sends data packages announcing U-Prox IC L panel
about itself as a new device in the local network
b.
The system will warn operator after the receiving of the data
package from the new repeater through the U-Prox IC L panel.
Than operator must add repeater to the system database (DB).
c.
Operator has to upload U-Prox IC L panel after repeater recorded
into the DB.
d.
After the U-Prox IC L panel uploaded repeater it receives the
answer from the U-Prox IC L panel. The address of the U-Prox IC
L panel recorded into the repeater and it stops to broadcast. Panel
will be connected to the certain access control system server,
eliminating panel control capture with another system.
Despite it is broadcast announcement, it is limited with one
range local network and active network equipment. That’s why
the IP addresses of the access control system server are to be
set manually for networks with sophisticated topology.
Return panel to the factory settings to eliminate the panel
connection to the system
Despite it is broadcast announcement, it is limited with one
range local network and
active network equipment. That’s why
the IP addresses of the U-Prox IC L panel are to be set
manually for networks with sophisticated topology.
Return panel to the factory settings to eliminate the panel
connection to the system