ITV U-Prox IP560 Instruction Manual Download Page 10 | Manualshive

Page: 10 / 48

ITV U-Prox IP560 Instruction Manual Download Page 10

Integrated Technical Vision Ltd.

10

http://u-prox.com

•

- keypad and reader blocking.

LED blinks Red in normal day mode. Panel performs programmed actions on RF ID
pass  or  code  entry  in  this  mode.  The  actions  could  be  Relay#1  and/or  Relay#2
activation and a choice of relay for activation.
LED is blinks Red and Yellow alternately in normal night mode. The difference from
day mode is that only codes and RF ID’s of category "Day and night" are active in this
mode.
Panel  switched from  night  mode  to  the day  mode  and vice versa" automatically  by
schedule or manually with code not having the right to control any relay. Such code
must have category "Day and night", because if it will have another category it will be
possible to switch panel into the night mode but will not be any way to return to day
mode.
Panel  performs  all  actions,  programmed  for  normal  user  code  and  activates  Alarm
output for  programmed time  on  duress  code entry.  Alarm  output activates  after the
code entry immediately. If there were no any keypad activity, panel will return to normal
mode in 40 seconds.

Panel programming in standalone mode

Download and install U-Prox Config application.

Run U-Prox Config application

Press “Start” button on application. Application will search for Bluetooth devices. If
Bluetooth is not activated on your device application will request for activation, press
‘OK’

Attention! The location services must be ON in Android 6.0 and higher for
Smart Bluetooth operation

Mobile devices with Android 5.0 OS and higher, Apple 8.0 IOS
and higher supported. Device must have Bluetooth 4.0 and
higher with BLE (Bluetooth Low Energy) support.

«
...
8
9
10
11
12
...
»

Summary of Contents for U-Prox IP560

















































Reviews:

No comments