http://www.itvsystems.com.ua
Integrated Technical Vision Ltd
15
In the free pass mode reader's LED blinks red and yellow alternately.
Access point switches into free pass mode at operator's command or when input,
programmed as "FREE PASS" is open. Access point remains in free pass mode until
this input is open or until operator cancels this mode.
While Access point is in free pass mode the locking device is in unlocked state and
panel does not respond to ID passing, PIN entry or RTE button pressing.
Blocked mode
The blocked mode is designed for situations when access to the premises should
be prohibited for everyone, in case of security alarm for instance. When access
point is in blocked mode access is granted to cardholders of IDs with "Security
Service" sign. Door cannot be unlocked with RTE button.
When access point is in blocked mode reader's LED blinks red and green alter-
nately.
Access point switches into blocked mode by operator's command or when input,
programmed as "BLOCKING" is open. Access point remains in blocked mode until
this input is open or until operator cancels the mode.
Mounting
NDC-F18 is delivered in the rugged metal box with rechargeable battery. Mount the
panel in place, convenient for service.
To mount the panel on a wall proceeds as follows:
- Open box cover, place the box in the required position on a wall and mark the
holes for mounting screws, using backplate as a template;
- pass the wires through the holes on a back plate,
- fasten the frame,
- connect the wires.
Set jumper S7 during control panel mounting before programming. Withdraw jumper 7
for long-term storage and transportation.
Mounting
Summary of Contents for NDC-F18
Page 2: ...2 Integrated Technical Vision http www itvsystems com ua ...
Page 4: ...4 Integrated Technical Vision http www itvsystems com ua ...
Page 23: ...http www itvsystems com ua Integrated Technical Vision Ltd 23 ...
Page 24: ...24 Integrated Technical Vision http www itvsystems com ua 060504 ...