ITV NDC-F18, Installation Manual

Page: 6 / 24

6 Integrated Technical Vision http://www.itvsystems.com.ua
Preface
NDC-F18 access control panel is designed for use in access control systems.
Primary goals of Access Control System are: identification of a person, confirmation
or not confirmation of access, control of movements in a necessary zone. It can
provide time and attendance logging, in addition to the usual task of restricting
individuals' access to certain areas.
All users' access information is gathered by a server, where administrators can
retrieve and analyze it. This data provides recording of staff movement within an
organization, whether it is a small company or a company that employs thou-
sands.
NDC-F18 panel operates as a total stand-alone unit with fully distributed database.
All valid card numbers, time zones and relay pulse times are loaded into controller's
memory. The panel controls access on two access points on a stand-alone basis
with no dependency on central computer system. Control panels are connected via
RS-485 dropline in Access Control Systems.
Features
o Supports all Wiegand reader technologies
o Distributed database for independent operation
o Operates in remote site configurations with dial-up (requires NDC-B052)
o 4-wire RS-485 communications, protection rated at 3000 V
o RS-232 communication port for local programming
o 8 supervised programmable inputs
o Tamper switch contact
o 4 Form C relays
o Up to 255 time zones to control card access
o Real time clock
o PC programming
o Local antipassback function
Preface