10
11
Installation of battery
Please use the original-packaging battery and accessories. Store the battery well if it is not used.
Please install the battery at shut down status.
Note: Please follow the correct procedures as shown in the figure to prevent damage to the battery contact points.
Charge the battery
The new battery must be fully charged and discharged for several times to reach its best performance.
Charge as soon as possible when the power is used up as over-discharge will damage your battery.
Disconnect the charger and the power supply and then disconnect the mobile phone when the battery is fully
charged.
Connect your phone to the charger as shown in the following drawing.
When charging, if the phone is switched on, the power quantity icon at the top right corner of the screen will twinkle
and will stop twinkling and fully display when the battery is fully charged. If the phone is switch off, an icon will
appear at the screen to show the battery is in charging.
Note: A little heating while charging is normal.
Use of battery
The performance of the battery is affected by multiple factors including your wireless loading network configuration,
signal intensity and temperature when using the phone, the function or settings you selected, the accessories
adopted for cell phone and other applied program modes.
To optimize the performance of the battery, please do as following regulations:
