26
27
4.1.4 Bluetooth
- Power:
Activate/deactivate Bluetooth.
- Visibility:
Set the visibility of Bluetooth device.
- My device:
Display device model when connected.
- Search audio device:
Display the model of online device.
- My name:
Edit the Bluetooth device’s name.
- Advanced:
Setting the parameters when Bluetooth is connected.
• Audio path: Set voice to the phone or to handsfree device.
• Storage: Set the path of transmission.
• Sharing permission: Set the permission as only reading or full control.
• My address: Display the information of the Bluetooth device.
4.1.5 Restore Factory Settings
You can restore some settings of the phone to factory settings. To restore the factory settings, enter the password.
The default password is “1122”.
4.2 Sound setting
You can set one of the following options:
• Tone settings: To set the tone for incoming calls of SIM card 1/2, alarm, power-on (except Bluetooth mode),
power-off, messages of SIM card 1/2 and key press.
• Volume: To set the volume of ring tone and key tone.
Name
Description
Network selection
New Search: To search the network again.
Select network: The phone only load the appointing network. When the network can’t
work, the phone won’t register other network
Search mode: Automatic/Manual.
Preferences
To select the preferred network.
• Alert type: Includes Ring, Vibrate, Vibrate and Ring, Vibrate then Ring
• Ring type: To set the ring type, including Single, Repeated and Ascending.
• Extra tone: Includes four types, Warning, Error, Camp-on, and Connect.
• Answer mode: You can choose the answer mode as Cover answer or Any key.
4.3 Display
• Wallpaper: Set the background picture in standby screen interface
• Screen saver: Set Standby on / off screen, and start the waiting time.
• Power on display: Select the system picture and user defined picture as your power on display.
• Power off display: Select the system picture and user defined picture as your power off display.
• Show date and time: Enable/disable to display the date and time.
• Show owner number: Enable/disable to display the owner number.
4.4 Call settings
4.4.1 SIM1/SIM2 call settings:
- Caller ID:
Includes Set by Network, Hide ID, and Send ID.
• Set by networ: The number of the phone will be sent as per the default mode when a call is initiated.
• Hide ID: The number of the phone will not be sent when a call is initiated. If the system doesn’t support this
function, it may not make a call.
• Send ID: The number of the phone will be sent when a call is initiated.
Note: This function requires the network support. For details, please contact the network operator.
- Call waiting:
To set functions like activate/deactivate and enquiry call waiting. During call holding and
making multi-party calls, this function should be activated first, and network support is required for the specific
implementation of the function.
- Call divert:
It is a network function that can only be used when you apply for this service of the network operator.
The function can divert calls that satisfy the conditions to the other caller’s phone number you have designated.
