ITT Advantage Actuator 2.0, Maintenance Manual

Page: 6 / 22

Product Description
Actuator identification
Design Overview
The actuator is a spring or double acting pneumatic actuator.
To determine if you have an Advantage actuator or an Advantage actuator 2.0 locate the spindle
compressor connection and determine if you have a pin or t-slot connection.
Figure 1: Pin connection for Advantage
actuator
Figure 2: T-slot Connection for Advantage
actuator 2.0
Model number
The actuator model number is located on the ITT identification tag. The model number is a four digit
number defining the actuator as follows.
Table 1: Actuator
Code Description
B Advantage actuator 2.0
Table 2: Mode of operation
Code Description
1 Fail open (spring to open, air to close) (direct acting)
2 Fail close (spring to close, air to open) (reverse
acting)
3 Double acting (air to open, air to close)
Table 3: Actuator series
Code
1
Actuator series
2
03, 04 3
05, 06 5
08, 09 8
15, 16, 17 16
Table 4: Examples
Model number Description
B308 Advantage actuator 2.0, double acting, series 8
B215 Advantage actuator 2.0, fail close, series 16 with a 15
spring set
1
For fail close actuators, codes are specific spring combinations.
2
Series number equates to diaphragm effective area.
Product Description
4 Advantage
®
Actuator 2.0 Maintenance Manual