Page 9
Product Installation
Step1
Fix the rear & front stabilizer(2)&(3)on the main frame(1) with four sets of waved washer(51), domed
nut(63) & bolt(62) tightly by multi-function spanner.
Note: the front stabilizer is with transport wheels.
Step2
--Loosen the adjusting knob(9) and pull it out first before sliding the seat support post(4) into the seat
support post housing on the main frame(1), and align holes for your desired height, then release the
adjusting knob and tighten it properly.
--Then fix the seat(5) on the plate of the seat support post (4) properly by multi-function spanner.
Note: Do not exceed the mark "stop".
