ITRON OpenWay OWR-1000-001, Installation Manual

Page: 12 / 22

Chapter 2 Installation
Configure the 2.4ZR-IPP Range Extender
The range extender and the gas module must have the same configuration settings. This can
be performed before the range extender is deployed into the field and must be done before
the final field installation.
Configure the range extender communications parameters with a Bluetooth-enabled FC200
handheld computer (or a laptop computer) loaded with Endpoint-Link or Endpoint-Link Pro
software, the OpenWay Belt Clip Radio, and the same configuration files used to program
the 2.4GZ OpenWay Gas Module during installation. See the
Endpoint-Link Endpoint
Programming Guide (TDC-0744-xxx) for more complete programming information. An
Itron magnet is also required to initiate communication between the range extender and
other devices.
6 DRAFT OpenWay Installation Guide