ITRON Centron, Technical Reference Manual

Page: 48 / 100

Operation: C1SC Version
38 CENTRON® Meter Technical Reference Guide
A watt disk emulator is located on the lower right hand corner of the display. The indicator
consists of three square segments in the lower right-hand corner of the display, which scroll
in the direction of energy flow. The figure below illustrates this revision.
Figure 30: C1SC LCD
The display will scroll between the billing register and the segment check mode based on
the factory programming option.
Option Description
1 7 second billing register display, 1 second blank, 7 second segment
check display (7/7)
2 7 second billing register display, 1 second blank, 1 second segment
check display (7/1)
3 Only the billing register is displayed (7/0)
Resetting Values
The C1SC can be reset using the Cellnet Shooter device in conjunction with a computer.
Programming the C1SC/CN1SC
The CENTRON C1SC/CN1SC Cellnet personality module programming port is located
such that the CENTRON inner cover does not have to be removed when programming or
testing the Cellnet module.
In order to communicate with the CENTRON Cellnet module, insert the programming slide
into the hole in the inner cover of the CENTRON meter that is located at the 12 o’clock
position as shown in the figure below.