ITOX SR960-N, User Manual

Page: 47 / 123

47
2
Hardware Installation
Power Connector
Connect a 10-pin ATX main power connector from the power sup-
ply unit to the ATX connector. The system board requires a minimum
of 120 Watt power supply to operate. We recommend that you use
a power supply that complies with the ATX12V Power Supply De-
sign Guide Version 1.1.
Important:
The system board consumes a minimal amount of power. Due
to its low power consumption, you only need a 120W to
120W to
120W to 120W to 120W to
150W 150W 150W 150W 150W power supply. Every power supply has its minimum
load of power. If you use a greater than 150W power supply,
the power consumed by the system board may not attain its
minimum load causing instability to the entire system.
X
1
5
6
1 0
PSON-
GND GND
+12V
VCC3
5VSB
VCC
VCC
-12V
GND