CT334exa
5. Setting Up the CT334exa and Mounting the Components
6
5-1 Setting up the CT334exa
The CT334exa should be placed on a solid, stable stand that adequately supports the weight of the
unit. In addition, the unit must be horizontal.
Caution
When you lift the CT334exa, place your hands under
the unit to securely hold it.
The CT334exa weighs about 13 kg.
5-2 Mounting the paper supply unit
(1) Open the top cover of the main unit. Then, remove the two button-head screws located on the
left and right sides inside the main unit (see
Figure 1
).
(2) Engage the U-shaped incision at the forward part of the paper supply unit with the prong
(securing pin) inside the main unit (see
Figure 2
).
(3) Position the screw holes located at the tip of both arms of the paper supply unit to the holes for
the button-head screws inside the main unit. Then, use the button-head screws removed in Step
(1) to secure the paper supply unit to the main unit (see
Figure 3
).
When tightening the screws for the paper supply unit, exercise caution not to disengage the paper
supply unit from the securing pin on the main unit in Step (2).
(4) If the paper supply unit wobbles, it is improperly mounted.
Note that improper mounting of the paper supply unit causes
paper jams and inaccurate cutting.
(5) Close the top cover of the main unit slowly.
Figure 1
Figure 3
Figure 2
Under the unit
Screws
Pins
Pin
Screws
