CT334exa
4. Producing Printed Output
4. Producing Printed Output
4
4-1
The CT334exa is designed to use A4-sized, short-grained paper (297 mm x 210 mm).
4-2
The impositions prescribed for your CT334exa are shown below (magnified figures, see Page
18~20).
4-3
You can fine-adjust the top and bottom margins through the main unit (see Page 11).
4-4
Printing paper can be curled by heat from the printer. Too much curling may cause paper to be
improperly fed and/or inaccurately cut. While this product can cut paper with a little curling, curling
of finished business cards is difficult to correct. It is recommended that the paper be uncurled as
much as possible before it is cut.
4-5
If you use paper designed specifically for inkjet printing, more than one sheet may be fed at a
time. If this is the case, supply them one by one to the paper supply unit.
4-6
The CT334exa cannot handle PPC paper, peel-off stickers, laminated paper, synthetic paper,
heat-sensitive paper, non-carbon paper, or film.
4-7
If you want to preprint a logo or something like that, UV printing is recommended. If you use
normal offset printing, a drier (powders) is applied to the paper. This causes the sensor to become
clogged, which results in a mechanical malfunction.
29
7
210
11
+1
.0
-1
.0
11
51
5
51
5
51
5
51
5
51
15
85
10
85
15
51 x 85 mm
29
7
210
15
85
10
85
15
7.
5
54
3
54
3
54
3
54
3
54
7.
5
54 x 85 mm
29
7
210
5
55
3
55
3
55
3
55
3
55
5
15
85
10
85
15
55 x 85 mm
Paper Feed Direction
