Itowa IT3R16, User Manual

Page: 19 / 22

RECEIVER IT3R16
USER MANUAL
14
The receiver starts up
but the machine does
not work.
The receiver is connected to
the machine, but it still does
not work
The fuses of the stop relays are blown. They
should be replaced with new fuses of the
same value.
Place the pushbuttons of the cable/cabin
instead of the remote control. If it still does
not work, the problem is with the machine.
After making change
of channel, the
machine is not
working
The led LINK switch on, but
the receiver is not working
Keep active the Start push button on the
receiver till it starts (Max. 1 minute).Make it
the nearest you can to the receiver.
The transmitter in pause, the
receiver continues with the led
switched on
There are interferences in the new channel,
You must change to another one
.
The remote control
has a short range,
and the machine
stops, although it can
be reset
The antenna is disconnected,
broken or in bad condition Replace the antenna or contact the
Technical Assistance Service
Although the transmitter is
disconnected by locking the
STOP BUTTON, the led of
the receiver is still on
There are interferences from another
apparatus you must change the working
channel.
The equipment
randomly switches off
or some relays do not
turn on, even through
the equipment is still
on The led PWR remains on but
makes a quick pulse. Input to the set is under 50% of the
nominal value ,
The led PWR remains on but
makes two quick pulses Input to the set is under 45% of the nominal
value.
ATTENTION:
ORIGINAL SPARE PARTS SHOULD BE USED FOR ALL REPAIRS,
AND SAFETY FEATURES.