RECEIVER IT3R16
USER MANUAL
9
5.3. POWER SUPPLY
¡ATTENTION!
CONNECTIONS HAS TO BE DONE THEREFORE WHEN THE
GENERAL SWITCH IS TURNED OFF, THE REMOTE CONTROL
ALSO IS TURNED OFF.
¡ATTENTION!
AS A SAFETY MEASURE, MAKE SURE THE UNIT IS EARTHED
WITH THE CORRESPONDING PIN OF THE CONNECTOR.
¡ATTENTION!
BEFORE FEEDING THE UNIT, MAKE SURE THAT THE SELECTOR
OF TENSION (J25, J26 Y J27) IS IN THE CORRECT POSITION.
Itowa will not be responsible for an inappropriate installation.
5.4. START-UP
Once the receiver is installed and when the general switch of the machine is turned on, the leds of the
receiver will light up as a test.
When you start up the transmitter, the receiver will start to work activating the stop and on relays (if
there is any), and the general contactor will be interlocked. From this moment, the activation of any
operation in the transmitter will active the corresponding relay in the receiver. The selected relay will
continue active during the time that the operation remains active in the transmitter.
Summary of Contents for IT3R16
Page 1: ...USER MANUAL RECEIVER IT3R16...
Page 2: ......
Page 4: ......
Page 9: ...RECEIVER IT3R16 USER MANUAL 4 FIGURE 3 3 IT3R16 RECEIVER VIEW...
