RECEIVER IT3R16
USER MANUAL
13
8. SCAN
The receiver has several systems for the detection of abnormalities in case other equipments or
systems may interfere within the communication between transmitter and receiver. Among these
systems there is the scanning of frequencies, which allow the tracking of the whole band in order to
find which channels are or have been occupied by any other system that transmits in the same band.
The receiver is able to find the channels that are or have been occupied. This means that the user can
deduce which channels are free. In order to avoid abnormalities, it may be convenient to select one of
these free channels as working channel.
8.1 AUTOMATIC SCAN
The receiver makes an exploration of the free and occupied channels of the band while it is in stand by
state. In case the selected channel might be occupied, the equipment will prove if it is the own one or if
it belongs to another equipment. In case the equipment accepts the selected channel, the new
configuration will be updated and the equipment will work in this new channel.
If the scanned channel is not recognized by the receiver, the receiver will simply register it as occupied
or free.
The occupied state of the channel will prevail over the free one, that is, whenever a channel is
occupied it will be registered as occupied even though in later scans it will be find free. This register will
be erased when the receiver has no power supply.
9.
POSSIBLE INCIDENTS AND SOLUTIONS
Incident
Situation
Solution
The receiver does not
start up
None of the indicators on the
receiver light up.
Check that the power supply of the receptor
is correct.
Check that the power supply of the receiver
is properly connected.
Only led S1 lights up.
Error of EEPROM.
Check that it is inserted in its housing. If it is
and still does not work, please contact the
Technical Assistance Service
.
The receiver is not connected
to the machine
Connect the cable from the receiver to the
electric panel of the machine using the
corresponding connectors.
The set is connected to the
machine but it does not work
The power supply of the set is under 45% of
the nominal value.
Summary of Contents for IT3R16
Page 1: ...USER MANUAL RECEIVER IT3R16...
Page 2: ......
Page 4: ......
Page 9: ...RECEIVER IT3R16 USER MANUAL 4 FIGURE 3 3 IT3R16 RECEIVER VIEW...
