INTELLIGENT CLEANER
OPERATING MANUAL
Use the infrared remote controller by refer-
ring to the following drawing:
- 6-
Power key
Direction key
Max key
Clean key
Spot key
Indicator
The cleaner can be controlled to clean by the infrared remote controller. As shown in
the above drawing,the three keys: Spot, Clean and Max work respectively for the
three work modes. Using the direction keys, it can control the cleaners’ movement.
The P key is for powering on/off. If you press the P key, the indicator light on the unit
will turn off, and the Cleaner will enter Sleep mode, which will save energy while in
its non-operating state. If you press the P key again, indicator light on the unit will turn
on, and the Cleaner will enter the Standby mode, while waiting for the next command.
The Intelligent cleaner is user-friendly with very little maintenance required after use.To
ensure optimal performance please observe the following procedures:
