iTools ITG25B, Instruction Manual

Page: 48 / 68

48
MAINTENANCE SCHEDULE
The maintenance schedule includes routines, inspection procedures and simple maintenance processes. Other more
complicated maintenance tasks or requiring special tools should be performed by qualified technicians or by
technical assistance service.
The maintenance schedule shown in this instruction manual is based on normal working conditions. If the appliance
is used under severe conditions such as overload, overheating, abnormal humidity conditions or too much dust,
consult the dealer for recommendations that apply to your specific needs.
Failure to follow the maintenance schedule and precautions may result in injury to the user or death.
Always follow the procedures and precautions in the instruction manual
Action
D
ai
ly
1st month or
20 hours
Every 3 months
or 50 hours
Every 6 months
or 100 hours
Every year or
300 hours
Check engine oil level
Check
    
Change engine oil
    
Check air filter
Check
    
Clean air filter
 

(1)

 
Drain the carburetor
    
Clean and readjust spark plug
    
Change spark plug
    
Clean fuel tank and filter
    
Clean fuel valve
    
Check idle speed
   

(2)

Check/adjust valve clearance
   

(2)

Check fuel line Every 2 years (replace if necessary) (2)

Check combustion chamber After 500 hours (2)
(1) Perform frequent maintenance tasks when the equipment is used in dusty areas.
(2) These items should be serviced by the service dealer unless you have the appropriate tools and mechanical
knowledge.