SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Page 1 of 11
www.itohdenki.com
ITOH DENKI, USA, INC.
135 Stewart Road
Ph: 570.820.8811
Hanover Industrial Estates
Fx: 570.820.8838
Hanover Township, PA 18706
rev13-0314
CBM-105FN/FP Circuit Board
Features
•
Adjustable acceleration and
deceleration time (0 to 2.5s)
•
Stable speed operation
•
Manual or automatic recovery of the
thermal overload device
•
One (1) rotary switch to select up to 10
different fixed speeds or external
voltage input for up to 20 fixed speeds
•
Forcibly stops the motor if motor lock
last for 4 seconds or thermal overload
error lasts for 1 second or more.
•
Two (2) LEDs (red & green) to identify
the type of error and power
•
Back EMF error for overspeeding
protection
•
Pulse signal output to indicate motor
revolution
•
Servo brake control allows product to
maintain its position after run signal is
removed
•
Error output selection for output in
normal or abnormal status
•
Lead free design; RoHS compliant
•
Low Voltage Protection reacts when
o
Sustained low voltage (less than 15V
DC) for at least 1 second
o
Fluctuating voltage dropping below 15V
DC, 5 times within 0.5 second
•
External Direction control
o
When external DIR signal is changed
while motor is running, the motor stops
for 0.5 second, then runs again in
opposite direction
