19
PM380/427LS User Manual
■
Use proper mounting brackets produced by ITOH DENKI to tighten shaft of
MDR.
If the shaft rattles or spins free inside the frame, it could result in cable
damage and/or damage to the MDR.
6. Installation
Install the MDR.
6-2.
Install the MDR
Install the MDR
Put the shaft on the cable side into
the conveyor frame.
1
2
Push the spring loaded shaft using the
tip of a slotted screwdriver, etc., and
pass it through the frame hole.
Necessary tools
8 mm wrench
■
Be careful not to get the
cable caught in the frame.
■
Do not push the shaft beyond
the thrust shaft collar.
■
Check that the spring loaded
shaft has sufficiently come
out of the external side of the
frame, as shown in the figure
below.
8
Slotted screwdriver
Cable
Phillips head screwdriver
Safety precautions
Advance preparation
Check Product
Installation
Maintenance/Inspection
Specifications
Spring loaded
shaft
