PETROL GENERATOR GT SERIES
OPERATOR’S MANUAL
TRADE SERIES
1. Always make sure to attach the positive (+)
batterycable first (1) and then the negative (-)
cable second(2) (see Figure 4).
2. Securely tighten the positive (+) battery cable
(redboot) to the positive (+) battery post. Make
sure boot is over battery post.
ASSEMBLY
To avoid electric shock:
• ALWAYS connect the positive (+) battery
cable (red boot) first when connecting
battery cables.
• ALWAYS disconnect the negative (-)
battery cable (black boot) first when
disconnecting battery cables.
• NEVER connect the negative (-) battery
cable (black boot) to the positive (+) post on
the battery.
• NEVER connect the positive (+)battery
cable (red boot) to the negative (-) post on
the battery.
• NEVER touch both battery posts
simultaneously.
• NEVER place a metal tool across both
battery posts.
• ALWAYS use insulated or nonconducting
tools when installing the battery.
The electric start generator is equipped with
a battery charging feature. Once the engine
is running, a small charge is supplied to the
battery via the battery cables and will slowly
recharge the battery.
WARNING
!
!
NOTICE
CONNECTING THE BATTERY
WARNING
To avoid electrics hock:
•
ALWAYS connect the positive (+)
battery cable (red boot) first when
connecting battery cables.
•
ALWAYS disconnect the negative (-)
battery cable (black boot) first when
disconnecting battery cables.
•
NEVER connect the negative (-)
battery cable (black boot) to the
positive (+) post on the battery.
•
NEVER connect the positive (+)
battery cable (red boot) to the
negative (-) post on the battery.
•
NEVER touch both battery posts
simultaneously.
•
NEVER place a metal tool across
both battery posts.
•
ALWAYS use insulated or
nonconducting tools when installing
the battery.
1.
Always make sure to attach the positive (+) battery
cable first (1) and then the negative (-) cable second
(2) (see Figure 4).
1
2
Figure 4 - Battery Connection Order
1 - Positive (+) Battery Cable (Red)
2- Negative (-) Battery Cable (Black)
2.
Securely tighten the positive (+) battery cable (red
boot) to the positive (+) battery post. Make sure boot
is over battery post.
ASSEMBLY
3.
Carefully remove the protective wrapping around the
lug of the negative (-) battery cable (black boot).
4.
Locate the black negative (-) cable attached to the
alternator case, route it to the negative (-) battery post.
See Figure 5 below for location of negative (-) cable.
1
Figure 5 - Locating Negative (-) Cable
5.
Pull back the black boot and securely attach the
negative (-) battery cable (black boot) to the negative
(-) battery post as shown in Figure 4. Replace the
black boot so it protects the cable lug and battery
post.
NOTICE
The electric start generator is equipped with a battery
charging feature. Once the engine is running, a small
charge is supplied to the battery via the battery cables
and will slowly recharge the battery.
CONNECTING THE BATTERY
WARNING
To avoid electrics hock:
•
ALWAYS connect the positive (+)
battery cable (red boot) first when
connecting battery cables.
•
ALWAYS disconnect the negative (-)
battery cable (black boot) first when
disconnecting battery cables.
•
NEVER connect the negative (-)
battery cable (black boot) to the
positive (+) post on the battery.
•
NEVER connect the positive (+)
battery cable (red boot) to the
negative (-) post on the battery.
•
NEVER touch both battery posts
simultaneously.
•
NEVER place a metal tool across
both battery posts.
•
ALWAYS use insulated or
nonconducting tools when installing
the battery.
1.
Always make sure to attach the positive (+) battery
cable first (1) and then the negative (-) cable second
(2) (see Figure 4).
1
2
Figure 4 - Battery Connection Order
1 - Positive (+) Battery Cable (Red)
2- Negative (-) Battery Cable (Black)
2.
Securely tighten the positive (+) battery cable (red
boot) to the positive (+) battery post. Make sure boot
is over battery post.
ASSEMBLY
3.
Carefully remove the protective wrapping around the
lug of the negative (-) battery cable (black boot).
4.
Locate the black negative (-) cable attached to the
alternator case, route it to the negative (-) battery post.
See Figure 5 below for location of negative (-) cable.
1
Figure 5 - Locating Negative (-) Cable
5.
Pull back the black boot and securely attach the
negative (-) battery cable (black boot) to the negative
(-) battery post as shown in Figure 4. Replace the
black boot so it protects the cable lug and battery
post.
NOTICE
The electric start generator is equipped with a battery
charging feature. Once the engine is running, a small
charge is supplied to the battery via the battery cables
and will slowly recharge the battery.
CONNECTING THE BATTERY
WARNING
To avoid electrics hock:
•
ALWAYS connect the positive (+)
battery cable (red boot) first when
connecting battery cables.
•
ALWAYS disconnect the negative (-)
battery cable (black boot) first when
disconnecting battery cables.
•
NEVER connect the negative (-)
battery cable (black boot) to the
positive (+) post on the battery.
•
NEVER connect the positive (+)
battery cable (red boot) to the
negative (-) post on the battery.
•
NEVER touch both battery posts
simultaneously.
•
NEVER place a metal tool across
both battery posts.
•
ALWAYS use insulated or
nonconducting tools when installing
the battery.
1.
Always make sure to attach the positive (+) battery
cable first (1) and then the negative (-) cable second
(2) (see Figure 4).
1
2
Figure 4 - Battery Connection Order
1 - Positive (+) Battery Cable (Red)
2- Negative (-) Battery Cable (Black)
2.
Securely tighten the positive (+) battery cable (red
boot) to the positive (+) battery post. Make sure boot
is over battery post.
ASSEMBLY
3.
Carefully remove the protective wrapping around the
lug of the negative (-) battery cable (black boot).
4.
Locate the black negative (-) cable attached to the
alternator case, route it to the negative (-) battery post.
See Figure 5 below for location of negative (-) cable.
1
Figure 5 - Locating Negative (-) Cable
5.
Pull back the black boot and securely attach the
negative (-) battery cable (black boot) to the negative
(-) battery post as shown in Figure 4. Replace the
black boot so it protects the cable lug and battery
post.
NOTICE
The electric start generator is equipped with a battery
charging feature. Once the engine is running, a small
charge is supplied to the battery via the battery cables
and will slowly recharge the battery.
3. Install the hair pin cotter through the axle pin
to lock itin place.
1 - Axle Bracket
2 - Hairpin Clip
3 - Axle Pin
4. Repeat previous steps on other wheel.
5. Pull back the black boot and securely attach
thenegative (-) battery cable (black boot)
to the negative(-) battery post as shown in
Figure 4. Replace theblack boot so it protects
the cable lug and batterypost.
8
www.itmtools.com.au
