SuperBus 8Z LED Touchpad
Page 6
Power Requirements: 12 VDC nominal (8 - 14 VDC),
65 mA (maximum)
Operating Temperature: 40°F (4°C) to 100°F (38°C)
Maximum Humidity: 70% relative, noncondensing
Dimensions: 5.0” H x 4.50” W x .92” D
Notices
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions:
1.) This device may not cause harmful interference.
2.) This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
O
Reorient or relocate the receiving antenna on the radio or TV.
O
Increase the separation between the equipment and receiver.
O
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
O
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Interactive Technologies, Inc. can
void the user’s authority to operate the equipment.
ITI is a registered trademark of Interactive Technologies, Inc. Concord and SuperBus are
trademarks of Interactive Technologies, Inc.
6 5 1 / 7 7 7 - 2 6 9 0
6 5 1 / 7 7 9 - 4 8 9 0
