4. Operation
4.1. HMI controller
The Smartboiler is equipped with an HMI controller.
7
6
1
2
5
3
4
7
6
1
2
5
3
4
Key
1
Screen
2
Select / OK
3
Back / Cancel
4
Up / Increase
5
Down / Lower
6
LED indicator
7
Service connection
The appliance has various statuses, menus and messages which
can be displayed on the screen, namely:
●
Initialising
●
Operational status (information menu)
●
Service menu;
-
Time
-
Configuration
-
Service
●
Errors
4.2. Initialising
An LCD test is performed while initialising. This briefly displays all
the on-screen icons and symbols. After testing, the screen will
display the heater's current operational status.
The LED indicator is off.
The very first time (after installation) the heater will initialise in
STANDBY mode. After this, the heater will always initialise in the
last selected mode – either ON or STANDBY mode – when the
power is restored.
Note
The heater may carry out a safety check while heating. During
this check the heating element switches off temporarily and the
following message appears on-screen: START TEST.
start
test
15
Summary of Contents for Smartboiler Mono
Page 1: ...A Itho Daalderop Smartboiler Installation Use ...
Page 2: ...Translation of the original document ...
Page 37: ...37 ...
