19
30
30
300
480
30
480
3.2.4. Wall mounting
a) Determine the exact location of the unit, taking into account
the Installation requirements on page 15.
b) Fix the wall plate
level
on the wall using 5 screws (mounting
material not supplied).
Standard assembly.
Turned assembly.
The edge of the mounting kit corresponds to the centre line of the
ducts. The notch at the bottom of the mounting kit indicates the location
of the condensation drain (left for a standard unit and right for a turned
unit).
c) Hang the ventilation unit with the mounting strip on the wall
plate. The mounting bracket is already placed in the unit. Make
sure that the ventilation unit rests on the supports on the
underside of the wall plate.
The sides of the wall plate correspond to the centre lines of the duct
connections.
80
600
848
168
80
600
848
168
