2) Control based on wireless sensors (CO
2
, RV and/or PIR) only
works when the ventilation unit is in Auto or Auto-Night mode.
3) Auto night is available in combination with the RH sensor as well
as the CO
2
sensor. This speed is not available if more than one
CO
2
sensor is connected to the ventilation unit.
Note
By default, the ventilation speeds Low, Medium, and
High are not limited in duration. The ventilation unit
therefore stays in the Low, Medium, or High speed
setting until a different speed is selected.
You can limit the duration of the ventilation speed
selected. After the pre-set time period has ended, the
ventilation unit will then automatically return to the Auto
speed setting. You can set this up using the configuration
settings menu. To do so, refer to the Configuration
Settings section.
16
