Itel DPR06 FM, User Manual

Page: 13 / 58

13 Front panel display
© 2016 ITEL Elettronica e Telecominicazioni Snc
It is possible to change the audio source from Audio Input menu.
If necessary, make any editing you want to the factory preset (any preset starting with Fxx)
selected, then save the preset to an user memory (Uxx).
Once saved, the preset will become the audio processing preset for the selected audio source, or
the general preset used for all sources, depending on whether or not the function "Source
Dep.Presets" was enabled.
A modified, but not saved, preset will be marked by the "MOD" prefix. This preset will be overwritten
if a new preset is loaded and then edited.
Mode F00: BYPASS, has the input level as the only editable parameter and this is the same both
for the Analog / AES EBU source and NetAudio.
In the case where it is necessary to put have the processor in bypass mode when any of the two
sources are selected, it will be possible to compensate the differences in audio levels, if any,
adjusting their input levels from the audio input menu.
If one of the sources is the Analog channel, we recommend to set the input level of the AD
converter in coarse 6dB steps, then use the bypass input level for fine tuning of Analog source, then
adjusting the level of the other channel, netaudio or AES EBU, from the audio input menu
2.1.8 Saving a preset
Curr Preset name shows the name of the preset which is actually on air The name can be changed
following the editing rules described before. When name editing is finished, the "*" cursor will be
positioned to the right side of the name string and will allow to move on the other editable elements
on the window.
Once the preset name has been edited, you can choose an user file to store it, then go to "SAVE"
button which will start to flash. Pressing now the knob will result in saving the preset to the specified
user file.