Itek i60019, Safety & Instruction Manual

Page: 9 / 12

9 www.itekbrand.co
Record Player:
Before use:
Remove the stylus protector.
Ensure that the tone arm is detached from the
tone arm rest before use. Secure the tone arm
back into the tone arm rest after use.
Using the record Player:
1. Slide the function selector to USB/Phono
mode.
2. Set the speed selector to required speed
(33 / 45 or 78 RPM) depending on the
record you wish to play.
3. Place the record onto the turntable.
4. Place the stylus on the beginning of the
record and lower the tone arm gently.
5. Adjust the volume to the desired level.
6. When the stylus reaches the end of the
record, the tone arm will automatically
stop and the turntable will stop rotating.
7. Lift the tone arm from the record and
return it to the tone arm rest.
Auto Stop:
When a record comes to the end, the turntable
will stop automatically if the auto-stop switch is
in the ON position.
If the switch is in the off position then it will
keep revolving until the tone arm is returned to
the tone arm rest.
Remote control:
The remote control requires two AAA batteries
(not included).
Controls:
Repeat: In CD mode
playback mode,
press to repeat
the current
song or track.
Program:
press to start the
p
In CD stop mode,
rogramming
CD Eject: Press to open and close the
CD door
function.
Play/Pause: Press one to
start playback.
Press again to
pause playback.
Skip/Search
Forward: Press once to
skip to the next song/track.
Press and hold to search
forward. Release to play.
Skip/Search
Backward: Press once to skip to the
previous song/track. Press
and hold to search backward.
Release to play.
Stop: Press to stop playback or
cancel the sto
Random: In CD mode, press to active
random function
red program.