Itek i60019, Safety & Instruction Manual

Page: 8 / 12

8 SERVICE DEPARTMENT:
+44 (0) 333 220 6058
Repeat:
Press the repeat button during playback to
select a repeat function.
Press repeat once to repeat 1 track. The
display will show RPT 1.
Press the repeat button twice to repeat all
tracks. The display will show RPT ALL.
Press the repeat button three times to turn off
repeat.
CD Programming:
Up to 20 tracks can be programmed in any
order. Before attempting to program, press the
Stop button.
1. Make sure the CD function has been
selected and the CD’s playback has been
stopped using the Stop button,
2. Press the program button. The display will
show PROG.
3. Select the track you wish to program
using the skip buttons.
4. Once the required track has been
selected, press the program button to
store the track or song into memory.
5. Repeat steps 3 & 4 to store additional
songs or tracks into memory.
6. When all the desired songs or tracks have
been programmed, press the Play/Pause
button to play the songs/tracks in the new
assigned order.
7. Press the Stop button to stop
programmed playback.
8. Press the Program button again to
review the songs/tracks that have been
programmed.
9. Remove all programmed memory by
pressing the stop button repeatedly until
the display shows PROG.
USB:
To use the USB function:
1. Turn the 5 in 1 Music System on, and
insert the USB stick into the USB socket.
2. Slide the function selector to USB/Phono
mode. The USB indicator will light up.
3. The 5 in 1 Music System will automatically
start playing the songs stored on the USB
drive.
4. Use the skip buttons and the play/pause
button to select, play and pause songs.
5. To safely remove the USB stick, turn off
the 5 in 1 Music System and pull it out of
the USB socket.
To use the Tape Player:
1. Insert the cassette into the tape player,
taking care
to insert the
cassette
correctly.
2. The 5 in 1 Music System will begin playing
the cassette automatically.
Note: It is recommended to remove the
cassette from the tape player after use.
Play Eject
Fast
Forward
Aux-in operation
1.
2.
3.
Turn the function switch to the
‘TAPE/AUX’ position.
Connect the unit to an auxiliary device by
connecting the Aux-in jack with one end
of a 3.5mm cable (not provided) and the
other end to the auxiliary device to
perform the music playback.
To stop playback, turn the function
switch to change to another function or
stop the auxiliary device.
CUSTOMER SUPPORT TEAM:
+44 (0) 333 220 6058