Itek i60019 Safety & Instruction Manual Download Page 7

7

www.itekbrand.co

BEFORE YOUR FIRST USE:

1.  Remove the parts from the packaging.
2.  Assemble as instructed in the assembly 

page.

3.  Your appliance is now ready for normal 

use.

Dispose of the packaging in a responsible 
manner.

USING YOUR APPLIANCE

How to position your unit:

Ensure that the product is placed on a flat level 

surface in a dust free, cool, dry environment 

with good ventilation and where it cannot be 

knocked or bumped and the power cable will 

not cause a trip hazard.

X-Bass:

Press the Extra Bass button to  activate the 

x-bass function and enhance the bass effect. 

Line out:

The 5 in 1 Music System can be connected 

to a Hi-Fi system by connecting the line out 

socket to the Aux-in socket with an RCA cable 

(not included).

Radio:

Plug the 5 in 1 Music system in and turn on. 
Turn the function switch to the ‘tuner’ function.
Turn the tuning dial to select the radios station 

you require.
Adjust the volume dial to the desired volume. 
Extend the wire antenna for the best reception.

FM:

   

Set the band switch to the FM 

position for FM radio. 

Stereo:

   Set the band switch to the FM-St 

position for stereo radio. 

CD player: 

When handling a compact disc (CD) place a 

finger through the centre and with your thumb 

hold the edge of the disc.
To use the CD function:
• 

Slide the function selector to the CD 

position. 

• 

Open the CD tray by pressing the door 

open button.

• 

Place the CD on the tray label side up and 

close the CD tray.

• 

At this point the CD will spin briefly and 

the LED display will show the number of 

tracks that are on the disc.

• 

Note:

 Please do not place anything other 

than a CD in the CD tray as this may 

cause damage to the CD tray.

• 

If the disc is dirty or scratched it may not 

play correctly.

• 

Never force the CD tray as this may 

damage the product.

• 

Never insert more than one CD at a time.

CD controls: 
Play/Pause Mode: 

 

Press the Play/Pause (   ) button to begin 

playing the CD. Press the Play/Pause button 

again to pause playback.

Stop:

Press the stop (   ) button to stop playback.

Skip up/Skip down: 

Press the skip up ( 

 ) button to skip to the 

next song or track on the CD.
Press the skip down ( 

 ) button to skip to the 

previous song or track on the CD

Summary of Contents for i60019













Reviews: