IT-E185
User Manual
Copyright © Itech Electronics Co., Ltd.
4
2. Put the DUT input terminal to the three-core socket on the front panel.
3. Connect the voltage and current terminals of IT9121/IT9121E power meter
to the corresponding terminals on the rear panel, as shown below:
NOTE
Connect the voltage positive terminal of the power meter to the V+2 terminal on the rear
panel and put the V+1 suspended when high current is measured.
4. Connect the AC power input socket of the rear panel to the 220 V AC input,
as show above.
5. To guarantee personal safety, after the measurement circuit is connected,
Connect DUT input terminal
Connect AC input
