www.itec-audio.com
9
MICROPHONES
ITEC 5100 WIRELESS SYSTEM
4.3 Operation with accumulators
If you use accumulators together with your pocket sender and the ITEC charger, check that in the battery case
accumulators of the original manufacturer and no batteries are inserted. In case a replacement of the accumu-
lators is needed use original parts only.
4.4 Ändern der Einstellungen
4.4.1 Making changes to Channel/Frequency
Use UP or DOWN button to go to the CHANNEL/ FREQUENCY page. Press SET for
about 2 seconds to activate the cursor. The cursor will fl ash to allow changes to be
made. Pressing UP or DOWN button will increase or decrease the channel number. The
corresponding frequency will change accordingly. When a desired channel is
selected, press SET for about 2 seconds or wait for about 5 seconds tostore the
data in the memory.
4.4.2 Making changes to Battery selection
Use UP or DOWN button to go to the Battery selection page. Press SET for about 2
seconds to activate the cursor. The cursor will fl ash to allow changes to be made.
Press UP or DOWN button to move the cursor to either NiMH (rechargeable battery)
or AKLN (Alkaline battery) position. When the desired battery has been selected,
press SET for about 2 seconds or wait for about 5 seconds to store the data in the
memory
4.4.3 Level Adjustment
The gain settings for lavalier and head set microphones can be adjusted via the “MT” control knob. The input
level for electronic guitars or other types of line-in signals can be adjusted via the “GT” control knob.
EG Konformitätserklärung
Declaration of Conformity
Hersteller/
ITEC Tontechnik und Industrieelektronik GesmbH
Manufacturer
Anschrift/
8200 Lassnitzthal 300, Austria
Adress:
Produktbezeichnung/
Drahtlosmikrofone
Product name:
Wireless microphones
Type/
ITEC
WM-516,
WM-5100,
WT-516,
WT-5100
Type:
Das bezeichnete Produkt stimmt mit den Vorschriften folgender Europäischer Richtlinien überein,
nachgewiesen durch die Einhaltung folgender Normen:
The above mentioned product has been manufactured according to the regulations of the following
European directives proven throug compliance with the following standards:
Normen / Generic standards
EMC: EN 301 489-1: V 1.8.1 (04/2008), EN 301 489-9: V 1.4.1 (11/2007)
Radio: EN 300 422-2: v.1.2.2 (03/2008), EN 300 422-1: v.1.3.2 (03/2008)
Safety: EN 60065:2002/A1:2006/A11:2008
Notifi ed Body CE 0681!
ING. WERNER LOIBNER
Name/Name
Geschäftsführer / Managing Director
Stellung/Position
2009-02-02
Datum/Date
Unterschrift/Signature
ITEC Tontechnik und Industrieelektronik GesmbH, A-8200 Laßnitzthal 300 / Austria / Europe
Tel.: +43 (0)3133/3780, Fax: +43 (0)3133/3780-9, ATU28706200, DVR: 0703109, HRB 3418 Landesgericht Graz, offi [email protected]
Diese Erklärung bescheinigt die Übereinstimmung mit den
genannten Richtlinien, beinhaltet jedoch keine Zusicherung
von Eigenschaften. Die Sicherheitsshinweise der mitgelieferten
Produktdokumentation sind zu beachten.
This declaration certifi es compliance with the above mentioned
directives but does not include a property assurance.
The safety notes given in the product documentations, which are
part of the supply, must be observed.