www.itec-audio.com
3
MICROPHONES
ITEC 5100 WIRELESS SYSTEM
1 m
1 m
1 m
1 m
2.1.1. Receiver Installation
For best operation, the receiver should be at least
1m above the ground and at least 1m away from
a wall or metal surface to minimize refl ection. The
transmitter should also be at least 1m away from
a wall or metal surface to minimize refl ection. The
transmitter should also be at least 1m away from
the receiver, as shown in Fig. 1. Keep antennas
away from noise source such as motors, auto-
mobiles, Spotlights with serious connection unit,
neon light as well as large metal objects.
Fig. 1
2.1.2. Audio output connection
There are two audio outputs on the back of the Diversity SDR receivers. Mic-level balanced and Line-level
unbalanced. Use shielded audio cable for the connection between the receiver and the mixer. If the mixer / amp
is a 1/4“ phone jack, connect a cable from the 1/4“ unbalanced audio output from the receiver to the mixer / amp.
If the mixer has an XLR input, connect a cable from the balanced XLR audio output from the receiver to the mixer
input. Audio output connection is as Fig.2.
Bild 2
Fig. 2
or