MULTIMIX 8/4 DIGITAL
www.itec-audio.com
MULTIMIX 8/4 DIGITAL
Installing the Input-Equalizer Module
A) Hardware installation
1) Remove the top cover of the device (8 screws)
2) Remove 8 jumpers (JP1..JP8, marked red in picture below)
3) If the two spacers aren´t already mounted (marked blue in picture below), remove the
bottom cover and fasten the spacers(M3, 10mm)
4) Take the module carefully from the packing and put it onto the
main module. Make sure the module is correctly connected
to all 9 socket strips. (JP1..JP8,JP23, marked red)
18
