MULTIMIX 8/4 DIGITAL
www.itec-audio.com
MULTIMIX 8/4 DIGITAL
Configuration change with BCD coded switch:
BCD switch
9) Interface for media remote control:
9-pole Submin-D plug on the housings rear panel, called ”RS-232 Remote“.
2 RXT
3 TXT
5 GND
7
8
Settings:
Baud rate: 19200
Parity: none
Data bits:
8
Stop bits: 1
Attached to the software description you will find the communication protocol between the
MultiMix and a media remote control.
10) Digital Link:
Hardware 1.0 to 2.0: Cinch sockets on the housings rear panel, called ”SERIAL LINK“
Prepared for e.g. multi-channel auto-mixing or other master-slave combinations in software
versions to come.
11) Analog Link:
RJ-45 sockets on the housings rear panel, called ”LINK OUT“, ”LINK IN“.
Serves the cascading of several devices, by linking the Bus to each consecutive device. The
connection is made by cable MM-RJ-0.5, each from one device’s Link-out to the next
device’s Link-in.
11
