MULTIMIX 8/4 DIGITAL
www.itec-audio.com
MULTIMIX 8/4 DIGITAL
Installing and removing Modules
Installing the DSP Module
A) Hardware installation
1) Remove the top cover of the device (8 screws)
2) Remove 4 jumpers (see picture)
3) If the three spacers aren´t already mounted (marked blue in picture below), remove the
bottom cover and fasten the spacers(M3, 15mm)
4) Take the DSP module carefully from the packing and put it onto the main module.
Make sure the module is correctly connected to all 4 socket strips. (red)
16
