SPIDER44/03 / SPIDER04/03_EN_2018/07_REV_2020/02
SPIDER 44/03 / SPIDER 04/03 - TECHNICAL SPECIFICATIONS
ITEC- Tontechnik und Industrieelektronik GesmbH, A-8200 Gleisdorf, Lassnitzthal 300
Tel.: +43 (0)3133 / 3780-0, of
fi
[email protected], www.itec-audio.com
44 mm
Depth: 180 mm
431 mm
482 mm
No responsibility is taken for the correctness of this information - Specifi cations subject to change
General
External power supply
switching power supply or 24 VDC (18 V < V < 32 V)
Current
300 mA (370 mA including line monitoring),
measures without applied load on the 10 VDC Voltage
Operating temperature
-5°C - +40°C
Dimensions (W x H x D)
482 mm x 44 mm x 180 mm, 19“ / 1 RU
Weight
3.1 kg
Audio
Audio frequency response
40 Hz-20 kHz/-1 dB
Harmonic distortion
<0,005 %
General dynamics
103 dB
Balanced inputs
max. free selectable gain -20 dB to +60 dB (only SPIDER 44)
Phantom power
+12 V, op24 V alterna48 V
Input impedance
6,6 kOhm
Balanced outputs
max. output level +15 dB, output impedance 300 Ohm
Sound Processing
Per input
2-band fully parametric equalizer ± 15 dB, Q=0,1-70
1 low/high pass 1st order
Per output
4-band fully parametric equalizer ± 15 dB, delay: 0.023 ms-24.5 s
bandpass
fi
lter: 1st – 4th order
compressor/limiter
Filter quality
selectable from 0.1 to 70
Serial interfaces
RS232/RS485
9600, 19200, 57600, 115.200 baud
Digital inputs
8 schmitt-trigger inputs on plug in-terminal strip
Input voltage
low < 1,6 V / high > 8 V
Max. allowable voltage
18 V
Input current (@10 V)
approx. 0.2 mA
Digital outputs
8 open-collector outputs on plug in-terminal strip
Max. voltage
36 V
Max. output current
200 mA per output / total 500 mA (sum of all outputs switched)
Analog inputs
8 analog inputs on plug in-terminal strip
Range
0-10 VDC
Resolution
8 bit
Input current (@10 V)
approx. 0.2 mA
Dry contact alarm relay
Max. voltage / max. switching power
48 VAC/DC / 500 mA
Network
Ethernet 100 Base-TX, IEEE 802.3u
