4.
INSTALLATION
Note:
Take the mixer out of the box and inspect for shipping damage. If there is obvious physical
damage to the outside of the mixer, contact the supplier of the mixer before you begin installation.
Rack Mounting:
To mount the CAM8PRO to a 19
"
rack, lift the unit up to the front of the rack and
secure it to the front of the rack with the necessary screws (not included with this unit).
A.
Turn all mixer Volume Control Knobs [Channel(s) (1), Main (2), and Auxiliary (3)] to zero.
1
AUX
M A
M A
BUS
BUS
CUT
LOW
HEADPHONE
POWER
MAIN
LIMIT
THRESHOLD
RATIO
ON
OFF
-18 -12 -6
-3
0
+3 +6 +12
-20
+20
100
0
1
2
3
Turn amplifier(s) volume controls to the 7 o'clock position.
B.
Connect Inputs.
Connect lead into desired pluggable terminal strip (6) on rear panel.
Press Input Pad Microphone/Line Switch (5) to appropriate position:
"
in
"
for line input or
"
out
"
for MIC
input. Note that the input from some mics is actually close to line level (-20dB) and for such mics the
switch should be at
"
Line
"
. Set switch for all unused channels at Line level. The Auxiliary Input (4) is
Line level only.
6
7
8
TRIM
TRIM
TRIM
LINE
MIC
LINE
MIC
LINE
MIC
AUX IN
9
5.
INSTALLATION
