8.
TECHNICAL INFORMATION
SPECIFICATIONS
Model
T-8S02
Signal-to-Noise ..................................................................Ref +26dB V @ 54 dB sys gain = 90dB
MIC Pre-amp Equivalent Input Noise ..................................-129dB @ 150 ohm, 20 Hz to 20 kHz
Maximum Voltage Gain...................................................... 96dB
Frequency Response ........................................................
1dB from 20 Hz to 20 KHz;
+0, -3 dB from 10 Hz to 30 Khz
Crosstalk (adjacent channels)............................................ better than -90 dB
Phantom Power..................................................................+30V DC
INPUTS 1-8
Input Impedance ................................................................3.5k ohm MIC; 15k ohm Line
Nominal Source Impedance .............................................. 150 ohm
Line Pad ............................................................................-50 dB
Input Gain/Trim Range ...................................................... 40 dB
Nominal Level (input trim pot mid-range) .............................-50 dB line pad off; 0 dB line pad on
Minimum Level (input trim pot max gain) .............................-70 dB line pad off; -20 dB line pad on
Maximum Level
(input trim pot min gain plus +20 dB headroom) ...................-30 dB line pad off; +20 dB line pad on
AUXILIARY INPUT
Input Impedance ................................................................ 20k ohm balanced
Nominal Input Level ............................................................0 dB
OUTPUTS
Output Impedance.............................................................. 220 ohm unbalanced, 440 ohm balanced
Nominal Load Impedance .................................................. > 600 ohm
Nominal Level ....................................................................+4 dB RMS
Maximum Level.................................................................. +26 dB RMS Balanced
Main Output MIC Pad ........................................................ -50 dB
AUXILIARY CIRCUITS
LED Bar Graph .................................................................. -18, -12, -6, -3, 0, +3, +6, +12VU
(0 VU = +4 dB) Average or Peak reading
LIMITER/COMPRESSOR
Threshold Adj. Range ........................................................ -20 dB to +20 dB
Ratio Adj. Range ................................................................ 0 to 100%
Low Cut Filter .................................................................... 18 dB/octave at 100 Hz
UNIT SPECIFICATIONS
Power Requirements.......................................................... 17V AC center-tapped; 230V AC, 50Hz
Dimensions ........................................................................484X190X44mm
Product Weight .................................................................. 3.9Kg
................................................................................
20
