Low Cut Switch
To remove excessive bass from an individual channel, press the Low Cut Switch (1) for that channel.
14
This feature helps eliminate low frequency noise (signals of 100 Hz and below, such as background
rumble from ventilation systems, etc.) and is used primarily with mic-level input. It is particularly
effective when handheld mics are used.
M A
BUS
CUT
LOW
1
Phantom Power
If a condenser microphone(s) is not independently powered, press Phantom Power Switch (2) to the
"
on
"
position.
ON
OFF
PHANTOM
POWER
GND
17VCT
AC
1
The phantom power switch will power condenser (capacitor) Mics through the Mic cable.
Depressing the button simultaneously applies phantom power to all channels set to mic-level.
5.3 Fine Tuning
OPERATION
