You must select the correct coil mode before vaping.
CALIBRATION AND COIL SELECTION
IMPORTANT:
UNPLUG THE DEVICE BEFORE CALIBRATING.
THE COIL MUST BE AT ROOM TEMPERATURE FOR ACCURATE CALIBRATION.
CALIBRATING THE DEVICE AFTER FIRING IS NOT ADVISABLE AS THIS MAY LEAD
TO INACCURATE READINGS.
IMPORTANT:
For accurate calibra�on the coil must be at room temperature. If a coil has been
heated then it must be cooled down to room temperature before calibra�on.
Eliquids should be room temperature for accurate calibra�on, if an eliquid is cold
then it must be warmed to room temperature before calibra�on.
15
14
Press the power bu�on “ ” to select the correct coil type.
The iTaste Kroma will only use Temperature Control with Ni200, Titanium,
Stainless Steel 316 coils or
use Wa�age; it will not fire both. You must choose
either Temperature Control or Variable Wa�age.
IMPORTANT:
You must select the correct coil type. Set the iTaste Kroma Temperature or
wa�age according to the a�ached coil’s recommended range.
Do not set the temperature higher than recommended or you may damage the
coil. If the coil is damaged, or tastes burnt, replace the coil immediately.
The ideal temperature or wa�age varies according to coil, eliquid, tank airflow and
personal preference. Start at the low end of the recommended coil temperature or
wa�age range and increase the set temperature or wa�age un�l you find your
perfect vape temperature and flavor.
Summary of Contents for Kroma
Page 1: ...USER MANUAL ...
