iTaste Kroma, User Manual

Page: 8 / 17

13 12
READY TO VAPE!
Check that the iTaste Kroma ba�ery is charged and func�oning properly.
A�ach an atomizer. Ensure that the atomizer is filled with eliquid and a�ached
correctly. There must be eliquid in the tank before you power on & ac�vate the
device. Do not dry burn the coil. Always Prime new Coils before vaping. Always
check & confirm the material and range of the a�ached coil.
Power on the iTaste Kroma by pressing the “ ” Power bu�on 3x.
The screen will display the last selected se�ngs.
Click the “ ” Power bu�on once to bring up the Coil Selec�on screen:
COIL MODE SELECTION SCREEN
<SAME> - Same coil with previous se�ngs
<Ni> - Ni200 - Nickel Coil
<Ti> - Titanium
<SS> - Stainless Steel 316L
<W> - Wa�age
To POWER OFF the iTaste Kroma:
When the iTaste Kroma is not in use, click the power bu�on “ ” three �mes to
power off the iTaste Kroma.
IMPORTANT:
Always power off the iTaste Kroma when it is not being used, or when it is going to
be stored in a pocket, bag or purse.
‘Vape while charging’ Technology:
The iTaste Kroma is recharged with a Micro USB cable. When plugged into a
suitable power source the iTaste Kroma can be vaped and charged at the same
�me with Innokin Technology’s ‘Vape while charging’ pass-through technology.
IMPORTANT:
If the ba�ery is totally discharged it must be recharged to at least 1 bar before
vaping with ‘Vape while charging’ pass-through technology. Ensure the ba�ery
power level has at least 1 bar remaining before using the vape while charging func�on.
COIL TYPE 0.21Ω
SAME Ni Ti SS W