RO
EN
25
PIPE-MOUNTING
Nettuno
can be mounted onto a horizontal pipe by means of a kit of fixing collars (optional, to be ordered separately). 4 different collar
sizes are available, as shown in the diagram below.
For simple installation of the product, proceed as described below.
1) Fix the bracket to the pipe by means of the “U-shaped” hooks and 2) Ensure that the bracket is securely fitted on the pipe and cannot
4 bolts supplied. See fig. 6 for selection of the holes.
rotate.
3) Pre-assemble the fixing screws on the rear side of
4) Insert Nettuno onto the bracket, passing the
Nettuno, leaving a space of at least 3 mm under the
screw heads on the larger holes and then slide
screws.
downwards.
PIPE MOUNTING KIT
CODE
DESCRIPTION
KIT-TUBO114
Kit for fixture on pipes of 1” ¼
KIT-TUBO112
Kit for fixture on pipes of 1” 1/2
KIT-TUBO200
Kit for fixture on pipes of 2”
KIT-TUBO212
Kit for fixture on pipes of 2” 1/2
