Italkero Torcia 90, User, Installation And Technical Assistance

Page: 17 / 28

17 INSTALLER
COVER THE MODEL
Install the device without the use of cement
or other adhesives for the building that may
prevent the eventual removal.
The Ductwork coating, all self-supporting,
complete the installation of this device and
must be constructed of material in full complian-
ce with the regulations (exp. wood).
Place the stack in the outer position of the
coating counterparts to prevent damage to
the heat produced by the burner unit.
installation
- Check the tightness of the pipes and gas fittings;
- Check the electrical connections (if any);
- Verify the correct operation of the Device;
SAFETY
This device has one safety device:
- Thermocouple (1)
Thermocouple
In case of accidental extinguishing of the flame or
sudden lack of gas supply, this device provides the
immediate closure of the valve off and then the
Device.
NO!
OK
1