Italkero Torcia 90, User, Installation And Technical Assistance

Page: 19 / 28

Switch-off
• Switch off the appliance: turn the control knob
clockwise and return to “
PILOT ” position.
• To switch the appliance off definitively (prolonged
period without use): turn the control knob clockwise
as far as “
PILOT ” position.
After reaching this position, press the control knob
and turn it to “
OFF ” position.
Close the gas supply tap.
REMOTE CONTROL UNIT
Ignition
• Open the gas supply tap.
• Press the switch (5) of the gas valve in “
I “ position.
• Make sure the knob (7) of the manual operation
mechanism is positioned on “
ON ”.
• Point the remote at the device and simultaneously
press the "
SPARK " and " Triangle ON " on the sup-
plied remote.
• An acoustic signal will indicate the start of the start
sequence. The electronic system checks correct gas
flow and ignites the main burner (these operations
could take up to 20 seconds). After burner ignition,
the flame automatically positions on maximum.
If the pilot flame goes out, wait at least five
minutes before repeating the described ope-
ration. During the start phase, the knob of the
manual operation mechanism must be on “ON”.
Operation
Once the Appliance has been switched on,
the Manufacturer suggests leaving it run-
ning for 10 minutes at max output, before making
any adjustments.
At minimum, the burner remains off, leaving on only
the pilot flame.
From minimum position, the output can be turned up
without repeating the ignition operation.
19 CUSTOMER SERVICE
5
7 1
MAX
OFF