Italiana Camini TEKNO 2 UP Installation, Use And Maintenance Manual Download Page 4

4

ENGLISH

SAFETY INFORMATION

•  The product is not designed for use by 

people, including children, with limited 

physical, sensory and mental abilities.

•  The appliance is not designed for cooking 

purposes

•  The product is designed to burn dry wood 

in the quantities and according to the 

procedures described in this manual.

•  The appliance is designed for indoor use 

and for environments with normal humidity 

conditions.

•  The product must be installed in rooms 

where there are no risks of fire.

•  In the event of fire, call the competent 

authorities. Do not try to put the fire out 

with water jets

Safety risks may be caused, amongst other 

things, by:

•  contact with fire and hot parts (e.g. glass 

and pipes). DO NOT TOUCH HOT PARTS 

and, when the product is switched off but 

still hot, always use the protective glove 

supplied. Failure do so can result in burns.

•  Use of improper ignition aids (e.g. 

alcohol). DO NOT IGNITE OR BOOST 

THE FLAME WITH FLUID SPRAYS OR 

A FLAME TORCH. Serious risk of burns, 

damage and injury.

•  Use of fuel other than dry wood. DO NOT 

BURN WASTE MATTER, PLASTIC OR 

MATERIALS OTHER THAN DRY WOOD 

IN THE COMBUSTION CHAMBER. The 

product may be soiled, the flue may catch 

fire, and environmental damage may 

ensue.

•  use of fuel in quantities other than those 

recommended. DO NOT OVERLOAD 

THE COMBUSTION CHAMBER. You risk 

buckling the combustion chamber and 

creating personal risks in attempts to 

resolve this problem and also irreversible 

changes in colour of the paints on metal 

parts. 

•  cleaning the combustion chamber when 

hot. DO NOT CLEAN THE COMBUSTION 

CHAMBER WITH A VACUUM CLEANER 

WHILE IT IS HOT. Risk of damage to the 

cleaner and smoke in the room.

•  cleaning the fumes duct with various 

substances. DO NOT ATTEMPT HOME-

GROWN CLEANING SOLUTIONS USING 

INFLAMMABLE PRODUCTS. Risk of fire 

and blowback.

•  cleaning the glass pane while hot with 

unsuitable cleaning products. DO NOT 

CLEAN HOT GLASS WITH WATER. 

ONLY USE RECOMMENDED GLASS 

CLEANING PRODUCTS OR A DRY 

CLOTH. Risk of cracking and permanent, 

irreparable damage to the glass

•  storing flammable materials within 

the safety clearance indicated in this 

manual. DO NOT PLACE LAUNDRY 

ON THE PRODUCT. DO NOT PLACE 

DRYING RACKS WITHIN THE SAFETY 

CLEARANCE. Keep all inflammable fluids 

away from the appliance when in use. Fire 

hazard.

•  blocking the aeration vents and air 

intakes in the room. DO NOT BLOCK 

THE AERATION VENTS OR FLUE. Risk 

of smoke returning into the room with 

consequent damage and injury.

•  Use of the product as a support or ladder. 

DO NOT CLIMB ONTO THE PRODUCT 

OR USE IT AS A SUPPORT. Risk of 

damage and injury.

•  use of the product with the combustion 

chamber open. DO NOT USE THE 

PRODUCT WITH ITS DOOR OPEN. 

•  adding fuel and opening the door, 

approaching the fire while wearing baggy, 

inflammable garments. DO NOT open the 

door or approach the glass with baggy, 

inflammable garments as they could 

easily catch fire.

•  Incandescent material projected from the 

open door. DO NOT throw incandescent 

material outside the appliance. Fire 

hazard.

If you have doubts, please do not take any 

action, but contact the dealer or the installer.

®

Summary of Contents for TEKNO 2 UP





























Reviews: