Use and maintenance manual
19
E)
Ignition and detection plugs
Remove the oven’s front panel located under the door of the cooking chamber.
Detach the electrical connections to the plugs.
Replace the plug taking care to position it as shown in Fig. 7.
Reassemble the various parts in the reverse order.
3.5
– Troubleshooting
A)
The oven does not switch on. Potential causes:
No electrical power.
The electrical wires are disconnected.
The safety thermostat has tripped or is faulty.
B) The burner does not ignite, shuts down continuously or switches off. Possible causes:
The ignition plug is not secured properly, is connected incorrectly or the wire is damaged.
The polarity of the connection wire is incorrect. Invert the phase and neutral on the plug.
The gas valve is faulty.
The pressure in the gas pipes is too low.
The injector is blocked.
The burner flame outlets are clogged
Faulty thermostat.
The electrical wires are disconnected.
C) The temperature cannot be adjusted. Possible causes:
The thermostat is faulty.
The thermostat bulb is damaged.
Fig. 7
