Lane link speed
By default the lowest Aurora link speed is set which ensures the most likely working trace
operation. Note that this setting directly impacts on Aurora trace interface bandwidth. The
higher the speed, more trace information per time unit can be broadcasted over the interface.
Hence, once the Analyzer trace operation (e.g. trace or profiler or coverage) is confirmed with
the default setting, higher Aurora link speeds should be tested and the highest operational
speed then selected for usage. This way the Active Probe will be configured for maximum
possible Analyzer session time. Different speeds are available.
The detailed configuration settings for the Active Probe can be selected via
Hardware / CPU
Options / Aurora
.
More general Infineon’s AURIX™ microcontroller family settings are described in
