USB-C to Samtec 22-pin TriCore Adapter
Ordering code
IAUSB-CSAM22TRICORE
The converter is used to connect the Infineon USB-C Active Probe with the USB-C connector to
a target featuring Samtec 22-pin ERF8 debug connector. The 22-pin converter must be ordered
separately.
Connecting USB-C converter to Infineon USB-C Active Probe
In general one of the selling points of the USB-C plug is that there is no way to incorrectly insert
it. However that is not the case with the Infineon USB-C Active Probe where used physical USB-
C type connector doesn’t feature the USB interface as someone could presume but rather the
Infineon AGBT (Aurora GigaBit Trace) interface whose signals are connected to the connector
in a way that USB-C connector orientation matters.
When attaching this converter to the Active Probe, make sure its
marking A
and
marking B
is
aligned and matches with the markings on the Active Probe connector.
